Good Home Design

Posts Tagged ‘painting in foreign’

Temperature, humidity and wind are factors you should consider not to affect the good adhesion and paint finishing.

The heat should not be excessive
It is recommended not to paint the sun. The direct effect of sunlight on surfaces causes them to acquire high temperatures that impair adhesion of the material. The solvent with which they are dissolved evaporates quickly producing an immediate drying and avoiding penetration into the surface, causing air bubbles or blisters almost immediately after applying. This is seen more frequently in oil paints and synthetic enamels and varnishes. For water-based paints may occur cracking of the layer of material applied to the wall. Therefore it is recommended facades and exterior paint in the shade or morning or evening. It should take into account the heat in the painting of swimming pools, where it is advisable to work on dry days with temperatures between 10º and 25º.

As the environmental humidity affect the paint
In the case of excessive humidity, condensation occurs on the surface wetting and adhesion difficult material applied, especially in the case of oil paints. Never paint when rain is approaching.

The wind and dust particles
The difficulty imposed by the wind is obvious. The adhesion of dust and dirt particles from the surface soil and give you a rough finish. This is less evident during the hell out of walls but seriously affected carpentry as door, windows and surfaces exposed to the touch.

Usually the color of the sky is blue or pools, but this does not remove the possibility that other shades are the chosen. The following is a color chart with names commonly used for paints space for swimming pools, as chlorine-rubber or epoxy, although not all manufacturers assigning them the same. You many do not have a large palette of colors and come to produce only one color.
1) Dark Blue, Pacific
2) Royal Blue, Medium Blue
3) Light Blue, Blue sky
4) Celeste clear
5) Black
6) Slate, Dark Gray
7) Granite
Fog
9) Jade Green Water
10) Arena
11) Beige Gardenia
12) Ocher, Coral

Why use blue or blue most often?
The causes are many, besides the blue color has a clean feeling, depth, freshness. The truth is that within the spectrum of light, the color fades less depth to the blue, in great depths the last color to disappear when entering the gua is this, rather than red or green example, this is an explanation of why the seas are blue. As more light reflected from the bottom of the pool at the same rays bouncing blue, water is more pure and clear.

The disadvantages of other colors
The green color could be another very beautiful in the application, although you can hide algae to grow, contaminating the water. The black creates a mirror effect, reflecting the sky and the outside, so difficult to see the depth and if they are objects or persons below the surface. The white glare produce, in addition to heat water to higher temperatures.